• GM338/GM398 Mobile Radios Basic Service Manual 6804112J17-D June, 2002. • Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied or reproduced in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola prod. • A CONTROL STATION. Compliance with RF Energy Exposure Standards Your Motorola two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. ![]() June, 2002 GM338/GM398 Mobile Radios Basic Service Manual 6804112J17-D. This radio complies with the IEEE (FCC) and ICNIRP exposure limits at duty cycles of up to 50% talk-50% listen and should be used for occupational use only. • Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations. Approved Accessories For a list of approved Motorola accessories please contact your dealer, or local Motorola representative. Fixed Site Antennas If mobile radio equipment is installed at a fixed location and operated as a control station or as a fixed. • SAFETY INFORMATION Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Vehicles To avoid possible interaction between the radio transmitter and any vehicle electronic control modules, for example, ABS, engine, or transmission controls, we recommend that the radio be. • SAFETY INFORMATION THIS PAGE INTENTIONALLY LEFT BLANK. • 6.3 Transceiver Board Removal..2-6 6.4 Disassembly of Control Heads..2-7 7.0 Radio Assembly...2-9 7.1 Control Heads - GM338 and GM398..2-9 7.2 Radio Chassis And Transceiver Board..2-9 7.3 Control Head Fitting...2-9 8.0 Radio Exploded Mechanical Views and Parts Lists..2-10 8.1 Radio Assembly...2-10. • Section 4 Radio Tuning and Programming 1.0 Introduction...4-1 2.0 CPS Programming Setup..4-1 3.0 Radio Tuning Setup... 4-3 3.1 Initial Test Equipment Control Settings..4-3 Section 5 Power Up Self-Test 1.0 Error Codes...5-1 Section 6 Model Chart and Test Specification 1.0 Low Power Radios... The transfer book review. • In instances where the product is covered under a “return for replacement” or “return for repair” warranty, a check of the product should be performed prior to shipping the unit back to Motorola. This is to ensure that the product has been correctly programmed or has not been subjected to damage outside the terms of the warranty. • Aftermarket Division (AAD). If no part number is assigned, the part is not normally available from Motorola. L0phtcrack 6 download. Nov 22, 2010 L0phtcrack 6: Crack Users Passwords ivanbm93. SecurityWise: How Password Crackers Work - Duration: 9:05. LiveSecurity 111,566 views. A 4-core CPU running a brute force audit with L0phtCrack 7 is now 5 times faster than L0phtCrack 6. 7.0.1 L0phtCrack Password Auditor 6.0.23. Cracker; Scratch. One of the more famous Windows password crackers over the years was L0phtcrack. 1 The tool was released by L0pht Heavy Industries. L0phtcrack is an enterprise Password Cracker, Password Hacker and Recovery Tool trusted by the U.S. Military and large corporations worldwide. If the part number is appended with an asterisk, the part is serviceable by Motorola Depot only. If a parts list is not included, this generally means that no user-serviceable parts are available for that kit or assembly. • Table 1-1 Radio Model Number (Example: AZM25KHF9AA5) Type of Model Freq. Power Physical Channel Feature Protocol Unit Series Band Level Packages Spacing Level 1-25W GM338 Program- Conventional GM338 (136- mable 174MHz) UHF1 25-60W GM398 GM398 (403- 470MHz) UHF2 (450- 527MHz) LB, R1 (29.7. • Radio Model Information THIS PAGE INTENTIONALLY LEFT BLANK. • Section 2 MAINTENANCE Introduction This chapter provides details about the following: Preventive maintenance (inspection and cleaning). • Safe handling of CMOS and LDMOS devices. • Disassembly and reassembly of the radio. • Repair procedures and techniques. • Preventive Maintenance The radios do not require a scheduled preventive maintenance program; however, periodic visual inspection and cleaning is recommended. • Wear a conductive wrist strap in series with a 100k resistor to ground. • (Replacement wrist straps that connect to the bench top covering are Motorola part number RSX4015_). Do not wear nylon clothing while handling CMOS devices. • When damaged parts are replaced, identical parts should be used. If the identical replacement part is not locally available, check the parts list for the proper Motorola part number and order the part from the nearest Motorola Communications parts center listed in the “Piece Parts” section of this manual. • Radio Disassembly - Detailed Radio Disassembly - Detailed The procedure to remove and replace a Control Head, Top Cover or Transceiver Board is similar for all models of radio. A typical procedure is therefore shown followed by specific disassembly procedures for Control Heads on radio models.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |